TCG27EBS(S)
Tanaka TCG27EBS(S) Double handle brushcutter

£390.00
RRP: £462.00

The Tanaka TCG27EBS(S) Bike handle Pro user brush cutter

Product: Tanaka TCG27EBS(S) Double handle brushcutterCategory: Brush CuttersAttributes: Tanaka , Double HandleTags:
Share:
Back to Brush Cutters

The all new Tanaka TCG27EBS(S) bike (double) handle brushcutter has been built to withstand the most arduous use by homeowners and Pro users alike. 

The high durability aluminium fan case adds strength in the critical area and is much stronger than the plastic cases of many competative machines, whilst the 2 ring piston ensures the best combustion and heat transfer from piston to cylinder.

The gearcase features 4 ball bearings rather than the conventional 3 for smooth running and durability. A grease nipple is also fitted.

Top Class low vibration levels are achieved by engine speed limiters, full length shaft support and the aluminium fan case.

This quality machine carries a 5 year warranty for domestic use as well as an incredible 2 year Pro user warranty

These machines requires 2 stroke fuel. The traditional way of making this fuel is to buy unleaded petrol and mix high quality 2 stroke oil at a ratio of 50:1.
However, standard pump petrol now contains Ethanol which causes the petrol to deteriorate rapidly causing starting and running problems.
A much better solution is to buy our Aspen 2 fuel, which is pre mixed with the oil and has a shelf life of up to 5 years. This fuel is better for the machine, better for the environment and better for your health.
For more information visit our Aspen page  More about Aspen

Model TCG27EBS(S) TCG27EBS(SL) TCG27EBSP(S) TCG27EBSP(SL)
Handle Bike Loop Bike Loop
Displacement 26.9mL (cc) 26.9mL (cc)
Max Power 0.9kW 0.9kW
Fuel Tank Capacity 520mL (For North America : 480mL) 520mL (For North America : 480mL)
Dia. of Pipe 24mm 24mm
Dimensions(L x W x H) 1,782 x 630 x 493mm 1,782 x 320 x 253mm 1,782 x 630 x 493mm 1,782 x 330 x 253mm
Dry Weight 5.3kg 5.0kg 5.4kg 5.2kg
Note: Manufacturer reserves the right to change s

A petrol brush cutter needs to be kept well serviced in order to perform. We offer a complete annual service which we will be happy to carry out for you.Follow the link below to our service section.

http://www.garden-kit.co.uk/service-and-repair/brushcutter-and-strimmer-service

Use of the correct fuel is also very important to all 2 stroke engines to ensure optimum engine life and ease of starting. The correct fuel to oil ratio for this brushcutter is 50:1 (2%).

Only semi synthetic, or fully synthetic oils of good quality should be used. We supply Rock Groundsman 2 stoke oil which we have found to be 100% reliable.

However, the fuel mix is only as good as the base petrol and unfortunately modern petrols are very poor quality and tend to degrade quickly (within a couple of months from purchase).
This degraded fuel leads to poor starting and reduced performance. As the fuel ages it also causes the oil content to separate from the petrol which can cause serious engine damage if used.

To overcome the problems associated with todays ‘pump’ petrol we strongly recommend the use of ASPEN alkylate fuel in all small petrol engines.

Follow the link to our Aspen page to learn more about this fuel.

http://www.garden-kit.co.uk/aspen-fuel

Your Contact Details

Your Enquiry