16" Atco Cylinder Mower powered by Briggs & Stratton engine. Heavy Duty construction
Back to Petrol powered Lawn MowersFor the finest of lawns you need to be cutting with the very finest of mowers and there is nothing to beat the finish achieved by a traditional cylinder mower.
The Atco Clipper 16 has Briggs & Stratton 4-stroke engine, as well as power drive and a centrifugal clutch with variable forward speed controlled via the engine throttle.
- EngineEngine BrandBriggs & StrattonEngine Type550E SeriesEngine Capacity127ccStarting MethodRecoilDriveDriveSelf PropelledCuttingCutting Width40cm / 16"Cutting Heights7-30mm (Variable within Range)Cutting CylinderSteel – 6 bladesCuts Per Metre113Cutting Height AdjustmentSingle LeverRollerYesFinishLawn StripesCollectingYesMulchingNoCollector51 litresGeneralChassisSteelLawn Size20m x 20mCollapsible HandlesQuick ReleaseSafety FeaturesOperator Presence ControlWarranty5 Years (Terms & Conditions Apply)dB(A) Rating96Weight69kg
The engine of this machine requires SAE10w30 oil. The engine will be filled prior to delivery, but subsequent oil changes will require 0.6 litres of oil. We suggest that a first oil change is carried out at roughly 10 hours use, then on an annual basis.
We would also suggest that an annual service is carried out.
https://www.garden-kit.co.uk/service-and-repair/cylinder-mower-service
The engine is designed to run on standard unleaded fuel, but please be aware that this fuel will go stale very quickly so it is best to use fuel that is less than 60 days old or engine problems can occur.
We recommend the use of ASPEN 4 fuel as it will last indefinitely without going stale, so peak performance and starting is always guaranteed. ASPEN 4 is however more expensive than standard petrol and can be purchased in sealed 5 litre cans from ourselves at the Colaton Raleigh shop.