Tanaka TCH22EAP2 (50) Petrol Hedge Trimmer
Tanaka TCH22EAP2 (50) petrol hedgecutter

RRP: £319.00

The TCH22EAP2(50) entry level hedge trimmer from Tanaka.

Product: Tanaka TCH22EAP2 (50) petrol hedgecutterCategory: Petrol HedgecuttersAttributes: Tanaka , Double sided blade , Standard ReachTags:
Back to Petrol Hedgecutters

The Tanaka TCH22EAP2 (50) Petrol Hedge Trimmer is the entry level hedgecutter from Tanaka and is aimed at the domestic market. Although classed as a domestic machine, we feel that  this hedgetrimmer is far ahead of the competition in both quality and ease of use.

This model has been equipped with a 22cc Tanaka Pure Fire engine; an advanced two-stroke unit that delivers its ample power (0.87hp) with reduced emissions and lower fuel-costs when compared to lower-specification engines with similar power ratings. The Tanaka TCH22EBP2 (50) Petrol Hedge Trimmer boasts a set of expansive 50cm double-sided, dual-reciprocating blades that  enable speedy cutting of your hedge. With a tooth-pitch of 30mm means you’ll be able to trim thick, woody growth without the twisting and chewing that can damage the hedge, while a 180˚ Quick-Twist™ rear-handle makes for realxed operation; and also facilitates comfortable left-handed use.

These machines requires 2 stroke fuel. The traditional way of making this fuel is to buy unleaded petrol and mix high quality 2 stroke oil at a ratio of 50:1.
However, standard pump petrol now contains Ethanol which causes the petrol to deteriorate rapidly causing starting and running problems.
A much better solution is to buy our Aspen 2 fuel, which is pre mixed with the oil and has a shelf life of up to 5 years. This fuel is better for the machine, better for the environment and better for your health.


Displacement 22cc
Engine Power 0.65kW
Starting System Recoil -S-start
Fuel Tank Capacity 0.3 Litres
Cutter speed 0.91m/sec
Cutter pitch 444mm
Blade Type Double Sided 50cm
Tooth Gap 30mm
180˚ Quick-Twist™
Weight 4.3kg

A petrol hedgetrimmer, needs to be kept sharp in order to perform. We offer a sharpening service alone, or as part of a complete annual service which we will be happy to carry out for you.Follow the link below to our service section.



Use of the correct fuel is also very important to all 2 stroke engines to ensure optimum engine life and ease of starting. The correct fuel to oil ratio for this hedge cutter is 50:1 (2%).

Only semi synthetic, or fully synthetic oils of good quality should be used. We supply Rock Groundsman 2 stoke oil which we have found to be 100% reliable.

However, the fuel mix is only as good as the base petrol and unfortunately modern petrols are very poor quality and tend to degrade quickly (within a couple of months from purchase).

This degraded fuel leads to poor starting and reduced performance. As the fuel ages it also causes the oil content to separate from the petrol which can cause serious engine damage if used.

To overcome the problems associated with todays ‘pump’ petrol we strongly recommend the use of ASPEN alkylate fuel in all small petrol engines.

Follow the link to our Aspen page to learn more about this fuel.




Your Contact Details

Your Enquiry